Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Black Widow Tech.html (html file)]

Black Widow pinouts

Black Widow pinouts (Atari, 1983)

Submitted by Franklin Bowen (mjrhavoc@clark.net or tfbowen@ingr.com)


Pinouts for "Black Widow" (Atari, 1983)
2/13/96  Changed `-SENSE (-5V)' to `-SENSE (GND)'
         

P20: 44-pin edge connector

        component side        solder side
        --------------        -----------
                   GND  A  1  GND
                   +5V  B  2  +5V
                        C  3  +22 VDC
                        D  4  -22 VDC
              10.3 VDC  E  5
          COIN LOCKOUT  F  6  COIN CTR R
            COIN CTR L  H  7  P1 LED
                P2 LED  J  8  FIRE UP
             FIRE DOWN  K  9  FIRE LEFT
            FIRE RIGHT  L 10
              P1 START  M 11  P2 START
                SW GND  N 12  SW GND
                        P 13
               CABINET  R 14  SLAM
              AUX COIN  S 15
             SELF TEST  T 16  COIN L
                COIN R  U 17
                        V 18
                        W 19
                        X 20
                   +5V  Y 21  +SENSE (+5V)
                   GND  Z 22  -SENSE (GND)


P19: 24-pin edge connectoor

        component side        solder side
        --------------        -----------
                 X OUT  A  1  X GND
                 Y OUT  B  2  Y GND
                        C  3  MOVE RIGHT
                        D  4  MOVE LEFT
               MOVE UP  E  5  MOVE DOWN
                        F  6
               RED GND  H  7  RED
             GREEN GND  J  8  GREEN
              BLUE GND  K  9  BLUE
                        L 10
             AUDIO GND  M 11  AUDIO 2
                        N 12  AUDIO 1


Notes:
------
- For testing purposes, Gravitar boards can be plugged directly into
  a Black Widow harness.  If you want to actually play the game, you
  just have to rewire the control panel, as all required pins are
  already present in the harness.

---------------------------------------------------------------------------